STP 2.0 Hp Pump
Submersible Turbine Pumps - 2 Hp Pumps
With faster fill times during peak hours and power savings during non-peak hours, FE PETRO® 2 Hp variable speed submersible pumps deliver maximized profits while mitigating operating expenses. 2 Hp submersible pumps are also available in fixed speed models.
WE SET THE STANDARD
FE PETRO® brand submersible pumping systems set the standard by which all other fuel pumping systems are measured. With best-in-class flow rates and backed by a long history of dependability, FE PETRO® pumps are responsible for delivering fuel to thousands of customers around the globe, day in and day out.
The Performance Leader
Unique features like variable speed technology and the MagShell™ design found only on FE PETRO® pumps deliver the industry’s best-in-class flow rates.
Dependability & Reliability
A pump has to be reliable, it has to be safe, and it has to perform. That’s why thousands of station owners around the world have trusted FE PETRO® pumps and the Franklin Electric motors that drive them to keep their business flowing for over 25 years.
Safe Servicing
The rock-solid design of FE PETRO® pumps has remained virtually unchanged since day one, meaning we can, and still do, service our pumps installed since 1988 with maintenance safeguard features and full backward compatibility.
TECHNICAL ADVANTAGES
ADVANCED PROTECTION
Available as an option on AG compatible submersible turbine pumps, Advanced Protection defends STPs from accelerated corrosion caused by the acedic byproduct of microbial activity.
Exterior Protection
Powder-coated and E-coated finishes protect exterior cast surfaces from accelerated corrosion.
Factory Installed
Advanced Protection is a factory installed option on STPAG and IST biofuel compatible models.
Corrosion Resistant
Stainless steel fasteners, riser, variable length column pipe and coupler protect against corrosion and provide long service life.
FILL CARS FASTER WITH THE MAGSHELL™
It’s always been about filling cars faster. Maximize your flow rate capabilities and your potential throughput and profits with our patented MagShell™. By expanding the pump motor shell, the MagShell™ increases the area for product flow by 45%.
High Flow Rates
A 4 hp variable speed STP with MagShell® provides the highest flow rates of any single 4″ submersible pump available on the market today.
Outlast, Outperform
With an all stainless steel shell construction powered by the legendary Franklin Electric motor, MagShell® equipped STPs are built for maximum uptime and long term performance backed by a proven track record that spans more than four decades.
Expanded Flow
Available on FE PETRO® 2 Hp and 4 Hp models, the MagShell® provides an expanded flow area, creating significantly higher flow rates equivalent to having one more nozzle open during peak operating times.
FILTER FUEL WITHOUT SACRIFICING PERFORMANCE
An Intake Filter Screen (IFS) provides fuel filtration for the entire system down to about the size of a grain of sand (0.009” openings). It’s designed to keep harmful debris, sediment, and tank corrosion from entering the pumping system and creating service events including dispenser filter changes.
Fuel Filtering
Stop debris from entering the pumping system and causing system damage or slowdowns. The output performance of the pump is maintained to that of the standard end bell while only adding about 1” to the overall length.
Self-Cleaning
An IFS self-cleans itself, so you don’t have to worry about pulling the pump to clean it. When the pump turns off, the slight back-flush of product caused by the check valve closing pushes any debris off the face of the filter.
Factory or Retrofit Installed
An IFS can be easily retrofit installed on existing FE PETRO® submersible pumps as well as competitive 4” pumps. You can also have it factory-installed on any new submersible pump.
4″ Submersible Pump Components & Key Dimensions
|
1. Manhole 2. Leak Detector 3. Manifold 4. Containment Sump 5. 4″ Riser 6. Tank Adapter | 7. Tank Manway 8. Column Pipe 9. Variable Length Coupler 10. Pump Motor Assembly (PMA) 11. End bell 12. Line Test Port, ¼” NPT | 13. Leak Detector Port, 2″ NPT 14. Syphon Port, ¼” NPT 15. Tank Port, ¼” NPT 16. Riser Pipe, 4″ NPT 17. Discharge Outlet, 2″ NPT |
Notes:
- Effective tank diameter (ETD) = Inside tank diameter (to top of 4″ bung), including tank manway and/or sump adapter.
- Model length (A) = ETD plus riser length minus bottom clearance minus 1″ thread engagement.
- Riser length (B) = Bury depth (to top of tank) minus pump head clearance minus tank manway and/or minus sump adapter.
OPTIONAL FEATURES
Variable Speed
With faster fill times during peak hours and power savings during non-peak hours, variable speed submersible pumping systems allow you to maximize profits with consistent flow rates while mitigating operating expenses.
Biofuel Blend Compatibility
FE PETRO® pumps are UL listed with both UL79A (up to 85% Ethanol) and UL79B (up to 20% or 100% Biodiesel).
Advanced Protection
Stop corrosion in its tracks. Special powder-coated, e-coated, and stainless steel components defend your pump in the tank and in the sump from accelerated corrosion.
Turbine Pump Interface
Remote enhanced pump monitoring and control including pump-in-water automation, clogged intake escalation, tank leveling, and tank priority.
Intake Filter Screen
Avoid system damage, pumping slowdowns, and reduce filter changes by keeping harmful tank debris, sediment, and corrosion from entering the pumping system with this factory-installed option.
STANDARD FEATURES
MagShell®
The patented stainless steel MagShell® is designed to maximize flow rate capabilities, potential throughput, and profits. By expanding the pump motor shell, the MagShell® increases the area for product flow by 45%.
Variable Length
The patented telescoping pump shaft lets installers adjust the length of the pump onsite for the perfect fit.
Active Air Eliminator
FE PETRO® STPs come standard with active air elimination, which eliminates air through the highest point in the pump head at all times when the pump is running, assuring air does not pass into discharge piping.
Safety and Ease of Maintenance
FE PETRO® STPs include a contractor electrical disconnect, which requires loosening only one bolt, allowing motor wiring to be disconnected without venting the dangerous tank vapors into the sump when servicing FE PETRO® submersible products.
Simple Servicing
If ever required, the pump can be easily removed from the tank by unthreading three bolts. There is no need to disconnect the syphon system or to remove the leak detector from the system to service the STP.
Manual Pressure Relief
As a standard FE PETRO® feature, a vent screw is provided to bleed line pressure to zero when necessary. By turning this screw, product is diverted back to the tank, dropping line pressure to zero. This reduces fuel discharged into the sump manhole or dispenser pan during servicing, further protecting service technicians and the environment.
Outlast, Outperform with Franklin Electric Inside
FE PETRO® STPs are powered by the legendary Franklin Electric motor and built for long term performance. Franklin Electric-powered submersible pumps provide maximum uptime and a proven track record in the fueling industry that spans more than four decades. They feature best-in-class flow rates and a long history of dependability.
Quality Certification
Franklin Fueling Systems is an ISO 9001 Certified Manufacturer.
General
- Variable speed models are available in variable lengths only.
- Fixed speed models are available in variable length and fixed length options.
- Check valve: 2¾” (70mm) diameter fluorocarbon seal constructed with cast aluminum body and steel backing washer.
- Pressure relief valve: available in four pressure relief settings, integral to check valve. Standard model relieves at 40 psi (2.8 bar) and resets above 35 psi (2.4 bar).
- Syphon: venturi-type syphon primer supplied with every submersible. Syphon check valve and secondary syphon sold separately.
- Air eliminator: every submersible includes a tank return path with one-way check valve to provide active air elimination.
- Electrical disconnect: electrical yoke for positive contractor disconnect during service.
Variable Speed Pump Motor
- 2 Hp, variable speed, two-stage centrifugal type pump motor with integral, automatic, thermal overload protection.
- 60 Hz Max. pressure: selectable operating pressure on MagVFC™ between 24 psi and 42 psi deadhead.
- 50 Hz Max. pressure: selectable operating pressure on EcoVFC™ between 1.65 bar and 2.90 bar deadhead.
- Available with MagShell® which results in 45% increased flow area around motor.
60 Hz Fixed Speed Pump Motor
- 2 Hp fixed speed, 3450 rpm, multi-stage centrifugal type pump motor with integral, automatic, thermal overload protection.
- Standard pressure (M200, two-stage) model, max. pressure = 36 psi.
- High pressure (HM200, three-stage) model, max. pressure = 45 psi.
- Available with MagShell™ for 45% increased flow area around motor.
50 Hz Fixed Speed Pump Motor
- 2 Hp fixed speed, 2875 rpm, multi-stage centrifugal type pump motor with integral, automatic, thermal overload protection.
- Standard pressure (three-stage) model, max. pressure = 2.55 bar.
- High pressure (four-stage) model, max. pressure = 3.03 bar.
- Available with MagShell™ for 45% increased flow area around motor.
Liquid Compatibility
- Max. liquid viscosity: 70 SSU at 60 °F (15 °C).
- STP variable speed models are UL and cUL listed for fuel mixtures containing up to 10% ethanol, and 20% MTBE, 20% ETBE or 17% TAME with gasoline.
- STPAG (AG compatible) models are UL listed for fuel mixtures containing diesel fuel with up to 20% Biodiesel, 100% Biodiesel, up to 85% ethanol with gasoline, and 20% MTBE, 20% ETBE or 17% TAME with gasoline.
- All variable speed (non-AG) models can also be used with diesel fuels, fuel oils, kerosene, Avgas and jet fuels in a non-gelled pourable state.
- 2 Hp fixed speed models can also be used with diesel fuels, fuel oils, kerosene, Avgas and jet fuels in a non-gelled pourable state.
- All wetted elastomers are made of a high grade, fluorocarbon compound.
Fuel Compatibility for All Submersible Turbine Pumps
STP Standard Submersible Turbine Pumps with Fixed or Variable Speed Pump Motor Assembly
- UL79 for petroleum dispensing products intended for use with gasoline or gasoline/ethanol blends with nominal ethanol concentrations up to 10 percent (gasohol, E10), diesel fuel, diesel/biodiesel blends with nominal biodiesel concentrations up to 5 percent (B5), kerosene, or fuel oil.
- 20% MTBE, 20% ETBE or 17% TAME with gasoline.
STPAG, STPAP, IST, ISTAP Alcohol-Grade Compatible and Advanced Protection Fixed or Variable Speed Submersible Turbine Pumps
- UL79A for gasoline and gasoline/ethanol blends with nominal ethanol concentrations up to 85 percent (E0 – E85) for products intended for use with gasoline or gasoline/ethanol blends with nominal ethanol concentrations up to 85 percent (E85).
- 20% MTBE, 20% ETBE or 17% TAME with gasoline.
- UL79B for diesel fuel, biodiesel fuel, diesel/biodiesel blends with nominal biodiesel concentrations up to 20 percent (B20), kerosene, and fuel oil for products intended for use with diesel fuel, biodiesel fuel, diesel/biodiesel blends with nominal biodiesel concentrations up to 20 percent (B20), kerosene or fuel oil.
- 100% biodiesel.
60 Hz Variable Speed Power Requirements
- Variable speed pumps can only be controlled by a MagVFC™ variable frequency controller.
- VS2 models can operate with single- or three-phase incoming power supply to the MagVFC™.
- Incoming power supply to the MagVFC™ can be 200-250 VAC, 50 or 60 Hz.
- MagVFC™ outputs a three-phase, variable frequency signal, valid for FE PETRO® variable speed pumps only.
- MagVFC™ max. line draw: 20 Amps.
- Max motor draw: 7 Amps.
50 Hz Variable Speed Power Requirements
- Variable speed pumps can only be controlled by a MagVFC™ or EcoVFC™ variable frequency controller.
- VS2 models can operate with single-phase incoming power supply to the MagVFC™ or three-phase to EcoVFC™.
- Incoming power supply to the MagVFC™ is 200-250 VAC, 50 Hz and 360-440 VAC, 50 Hz to the EcoVFC™.
- MagVFC™ or EcoVFC™ outputs a three-phase, variable frequency signal, valid for FE PETRO® variable speed pumps only.
- MagVFC™ or EcoVFC™ max. line draw: 20 Amps.
- Max motor draw: VS2 7 Amps.
60 Hz Fixed Speed Power Requirements
- 2 Hp fixed speed models require single-phase, 208-230 VAC, 60 Hz incoming power.
- 2 Hp fixed speed models incorporate a starting and running capacitor, with internal bleed resistor, rated 370 Volt, 40 microfarad.
- SPGC-220 single-phase Guardian Controllers and STP-CBS single-phase control boxes are available for 2 hp pump control.
- Max. motor draw: 12 Amps.
50 Hz Fixed Speed Power Requirements
- 200B models require single-phase, 200-250 VAC, 50 Hz incoming power and 200C models require three-phase 380-415 VAC 50 Hz incoming power.
- 200B models incorporate a starting and running capacitor, with internal bleed resistor, rated 440 Volt, 40 microfarad.
- SPGC-220 single-phase Guardian™ Series controllers and STP-CBBS single-phase control boxes are available for 200B pump control.
- STP-SCIIIC three phase smart controller and STP-CBB3C three-phase magnetic starter are available for 200C contol.
- Max. motor draw: 200B 10 Amps, 200C 5 Amps.
Approvals
- cULus listed.
- Consult factory for applicable approvals.
2 Hp Variable Speed Pump Performance Chart – 60 Hz
For 50 Hz performance charts, please see the 50Hz-Submersible Turbine Pumps-Datasheet in Downloads.
2 Hp Fixed Speed Pump Performance Chart – 60 Hz
For 50 Hz performance charts, please see the 50Hz-Submersible Turbine Pumps-Datasheet in Downloads.
2 Hp High Pressure Fixed Speed Pump Performance Chart – 60 Hz
For 50 Hz performance charts, please see the 50Hz-Submersible Turbine Pumps-Datasheet in Downloads.
